Order a site contamination enquiry report
Tono arotakenga o tētahi wāhi whenua tāoke
You should know
The site contamination office will be closed from 21 December 2018 to 7 January 2019.
From Monday 17 December to Friday 21 December, we will only be processing urgent enquiries, and any standard enquiries that have a response date before 21 December.
Cost of a site contamination report
A site contamination enquiry report is calculated on a time and materials basis, with a minimum charge of $81, or half an hour of work.
We will provide you with a quote after you place your order. If a report requires more than two hours of work, we will contact you before going ahead.
Read fee table.
|Service|| Fee|| Timing|
|Standard report (including large contaminated site enquiry)|
$162/hour (inc GST)
Allow ten working days
|Urgent request fee|
$100 (inc GST)
Allow three working days
Large site enquiries
If there is a distance of more than 500m from the centre of your site to its edge (including the 200m buffer), you will have to make a large contaminated site enquiry.
To do this, you must include:
- a completed Site Contamination Enquiry request form
- any corresponding legal descriptions or lot numbers (if available)
- a .mpk shape file of the site.
Large site enquiries must be emailed to email@example.com.
How to order a site contamination report
Cancel a request for reports
If you have requested ongoing reports, you can cancel this request by emailing the contaminated sites team at